Arbor and Pergola Staining Near Me In Prosper, Texas
Arbor/Pergola StainingPergolas are elegant and simple additions to any outdoor living space, but just because they look simple doesn’t mean that they don’t require any care.
Outdoor wooden fixtures are subject to pelting rain, harsh sun rays, and freezing temperatures. While some may recommend painting your pergola, the best way to keep wood safe outdoors is by staining it in the best conditions and maintaining your stain by proper reapplication. Is It Better to Paint or Stain a Pergola?Will paint protect your Pergola or Arbor from rain, heat, and moisture? The simple answer is no.
Paint on wood will peel over time. Painted wood can also chip and even drip onto your wooden patio below if it rains. This is because the paint will only coat the surface of the wood, whereas a stain penetrates the wood and seals the wood from the weather. It is better to stain your pergola. Wood staining protects pergolas and brings out the natural beauty of their wooden structure. Stained planks are also much easier to maintain. Paint requires scraping when reapplication time comes. The best wood stains simply wear off over time and need a good cleaning before reapplication. There isn’t much of a contest. If you want the best looking pergola on the block, a well-applied wood stain will give you much more effective and longer-lasting protection. When is the Best Time to Stain an Arbor?Staining wood requires patience and a little bit of foresight.
The best time to stain a pergola or arbor depends on how new the wood is, how dry and hot the weather is, and when the last time was that your wood was first stained. If you want to protect your new arbor and you just nailed down the last wood plank, you might have to wait for your wood to dry out. Any moisture that remains in the wood can push out the stain. The professional recommendation for applying stains is to wait 3 to 12 months and scrub away the gray cells off of the wood before application. If you do need to apply the stain right away, you will have to choose from a selection of stains with light viscosity, and be sure to keep an eye on your planks for any tarnishing. Before having the stain applied, you need to make sure that it hasn’t rained for 2 days and will continue to stay dry outside for another 2-3 days. A deck that has already been stained can be tested by a “water test” in which a bit of water is poured on the tarnished area. If the water is absorbed into the wood, it needs to be re-stained. If the water beads, then your arbor is weather safe. |
|
How to Prepare for Staining Your Arbor
So it’s time to weather protect your arbor. Remember to schedule your wood stain application after a couple of days with dry weather and that it will be safe from rain for a few days as well.
If you are using new wood and purchased a nice wood stain that suits your needs, it’s time to clean your arbor. Some scrubbing with some wood cleaner and brightener or a light power washing should do the trick too. Once the wood is allowed to dry, apply two coats of wood stain.
Staining makes your wooden arbor or pergola weather safe for a very long time, and if the stain wears down, a simple reapplication following these steps will keep your perfect outdoor living area safe and looking beautiful.
If you are using new wood and purchased a nice wood stain that suits your needs, it’s time to clean your arbor. Some scrubbing with some wood cleaner and brightener or a light power washing should do the trick too. Once the wood is allowed to dry, apply two coats of wood stain.
Staining makes your wooden arbor or pergola weather safe for a very long time, and if the stain wears down, a simple reapplication following these steps will keep your perfect outdoor living area safe and looking beautiful.